Loading... Please wait...

Categories

Custom FD3S NOAH Car Cover

Hover over image to zoom

  • Image 1
  • Red with R1/R2 wing
  • Black with no wing and 99spec front bumper
  • Image 4
  • Green with 99spec medium rear wing
  • Gray
  • Comes with the SakeBomb Garage logo on the front in high-quality silkscreen
  • Image 8
  • Wide variety of colors available to suit your color needs
$210.00

 Product Description

These NOAH covers, made by NexTec, are the go-to choice for covers where heat insulation is a concern.  Bulkier than our Weathershiled covers and made from thicker fabric, the NOAH covers offer improved dent and ding protection as well. 

Options:

  • Base FD w/ No wing – Made for OEM '93-'95 cars with no wing
  • R1 / R2 with OEM wing – Made for R1 model '93-'95 with R1 wing
  • 99 Spec / Aftermarket Front – allows for aftermarket front, side skirts, diffuser, front lip, & low/small wing
  • 99 Spec / Aftermarket with 99 Spec / Medium Wing – allows for aftermarket front, side skirts, diffuser, front lip, & 99 Spec/Medium wing
  • 99 Spec / Aftermarket with High Track Wing – allows for aftermarket front, side skirts, diffuser, front lip or splitter, & high-mount track wing 60" wide or less
  • 99 Spec / Aftermarket with APR Wing – allows for aftermarket front, side skirts, diffuser, front lip or splitter, & APR wing or any other wing 60"-70" wide

Highlights:

  • High Performance Non-Woven Fabric
  • Dual Protective Outer Layers – Two outer layers of bi-component spunbond, utilizing side-by-side spinning technology. Each individual fiber is a balance of polypropylene and polyethylene that delivers both strength and softness. The light gray color does not attract heat and the dual layers are treated with UV inhibitors for extended outdoor use.
  • Microporous Film Middle Layer – The barrier layer is breathable film, a proprietary stretch-film technology developed exclusively for Kimberly-Clark. The film is stretched and then subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust, yet large enough to allow moisture vapor and heat to escape. This helps reduce the bulk of the nonwoven fabric, while providing an almost solid barrier against the elements.
  • Soft, Paint-Protecting Inner Layer – A single, heavier layer of bi-component spunbond, utilizing side-by-side spinning technology. This heavier, single layer (as compared to a single outer layer) provides the "soft touch" necessary for today's water-based paint finishes.
  • Outdoor or Indoor Use

Care instructions: These covers can be washed in a home washing machine (without agitator).  Add one cup of Simple Green concentrate, set the machine to cold, and spin to medium.  We recommend completing an additional rinse-only cycle on cold to remove all detergents.  DO NOT put the cover in the dryer; simply put it out on your clean car to air-dry.  For light dirt and grime, simply rinse the car cover on the car with clean water and allow to air-dry.

 Product Videos

NOAH® Block-It Fabric Car Covers from Covercraft Industries
  • NOAH® Block-It Fabric Car Covers from Covercraft Industries
    The high performance non-woven fabric with the film barrier ed...

 Find Similar Products by Tag

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

What's News

newsletter

Copyright 2018 SakeBomb Garage LLC. All Rights Reserved.
Sitemap | #SAKEBOMBGARAGE