Loading... Please wait...

Categories

SBG Competition Rear Brake System (S2000, Rear RX8 Caliper Retrofit kit)

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
SakeBomb Garage
Everyone Else: $1,295.00
$1,145.00 (You save $150.00)
Availability:
Availability Limited, Wait times may vary

 Product Description

Our goal for this rear braking system was to provide a high-torque rear brake solution for the Honda S2000 which retains the stock e-brake.  This rear brake system was developed to be used in conjunction with our AP Competition Front Brake Kit for the S2000.  While our Competition Front Brake Kit performs exceptionally well, the stock rears (or '99 spec for that matter) left some additional braking potential on the table.  Our rear brake kit utilizes the stock caliper with a billet 6061 aluminum relocation bracket to increase and optomize rear brake torque by allowing the use of our custom 330mm two piece rotor (vs 294mm stock rotor).  Our rotor is designed with a hard anodized aircraft-grade billet 2024 aluminum hat to withstand extreme temperatures, and is mated to our 330mm directional curved vane discs with aero-space hardware.  

This rear brake kit combined with our AP Competition Front Brake Kit for the Honda S2000, represents the pinacle of competion braking packages for the S2K, while retaining the streetability required to drive to the track and back.


SBG Rear Brake Kit Specs & Benefits:

  • Increased Disc diameter to 314x20mm  (from 282x12mm SOLID stock rotor)
  • Directional curved vanes rings for further increased cooling efficiency (colder rotor temps allows for more street-able pads, even for track days)
  • Lightweight two-piece rotors with mil-spec hardware.
  • Retains complete e-brake functionality.
  • Comes with DOT approved stainless steel brake lines.
  • OEM Components means performance with reliability and affordable pad replacements.  Easily sourceable components for maintanance.

 

 

Our Vented Brake Package Includes:

  • Custom SBG Two-piece Brake Rotors (314x20mm) with Aluminum 2024 Hard Anodized Hats and Mil-Spec Hardware
  • 6061-T6 Caliper Relocation Brackets
  • E-brake Rotational and Cable Brackets to Adapt Caliper to S2K
  • E-brake Cable Extension Mounting brackets
  • Complete Step-by-Step Pictorial Installation Instructions
  • *Brake pads are not included but optional
  • **Customer must source RX8 calipers (affordable used on ebay, rebuilt, or new from Mazda)
 






*NOTE: This rear brake kit has been designed to be used with our AP Competition Front Brake Kit or Street brake kit running a 325x32mm rotor.  Installation of this rear kit with stock front brakes or other aftermarket front brakes is done at your own risk.  Due to the increased rear rotor size and caliper piston size, rear braking force is increased as compared to stock.  If you are running stock fronts or aftermarket big brake kits with undersized pistons, we recommend installing a lower coeffecient friction pad in the rear to compensate for increased rear bias.  Optionally a proportioning valve may be installed with setups other than the SBG AP Front Competiton or SBG Street Brake kits so that you may safely and correctly adjust the rear brake bias . Installing this rear brake kit with any front braking system other than SakeBomb kits made to pair with this competition rear kit is done at your own risk.

**17" rims or larger are required. This brake kit WILL NOT WORK the the stock 16" rims.  

***As with all SakeBomb parts, this braking system is for OFF ROAD USE ONLY.  Users assume all risk associated with the use, mis-use, or failure of components.  By installing this kit you accept responsibility 

 

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

What's News

newsletter

Copyright 2017 SakeBomb Garage LLC. All Rights Reserved.
Sitemap | #SAKEBOMBGARAGE