Loading... Please wait...


Honda Civic Type-R (FK8) 2pc Rotors + Brake Lines Combo

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4

 Product Description


Sakebomb Garage is proud to present the first up-sized OE replacement rotor rings for the Honda Civic Type-R FK8.  Tired of warping stock discs on the track? Want to shed weight and dramatically increase cooling?  These rotors are 2mm thicker than stock rotors, lighter than OEM, directional curved vane (which acts as an air pump to actively cool the disc), and fit perfectly in the stock front Brembos. We've listened to the community and understand with the amount of track days these cars can handle, the brake rotors become a weak point in an otherwise fantastically sorted chassis. We've taken the knowledge and R&D from our successful BBK's in the past on other platforms and wanted to bring that to the Type-R community! 


SBG Premium Brake Rotors:

  • Competition Inspired 325mm x 32mm Rotor Design
  • High-Performance, Light-Weight Solid Mount Rotors
  • Rotors feature 32 Curved Directional Vanes, with 15mm Air Gap
  • Proprietary High Temperature Alloy
  • Slot Pattern engineered to increase pad bite 
  • Race Grade 2024 T351 Hard Anodized Aluminum Rotor Hats
  • Hat and Brake System Cross Compatible with AP 350 x 34 Floating Race Rotors for Future Upgrades


The directional vanes (as opposed to straight vane OEM rotors) act as an air pump to pull cold air from the center of the rotor and expel hot air at the rotors edge.  Directional curved vanes literally expel heat and therefore run cooler than straight vane designs given the same rotor mass.  The rotors in this kit were designed for efficiency and weight reduction to drastically raise the bar for braking capacity while avoiding the deteriments of unsprung weight on handling.

*Brake pads for this caliper are readily available from nearly every pad manufacturer. As pad choice varies greatly depending on personal preference, application, and desired cost, we decided not to include pads to reduce the total cost as one pad obviously does not fit all. To see a list of commonly used pads please visit the following Link. We are able to source many other pads such as Performance Friction and Endless. We will be stocking various Endless pad compounds in the near future.

*Note: 17” or larger rims are required to accommodate this brake kit.  





Get the most out of your brake system by replacing your worn out rubber lines. Rubber lines expand outward during braking giving the pedal a "spongy" feel. These stainless steel braided, Teflon lines are the ideal replacement for old cracking rubber lines. Many aftermarket brake lines use bare stainless lines, which allows dirt and debris to become embedded in the lines and degrade them over time. Our lines come with either a red or smoke colored protective outer PVC coating to prevent premature wear. Not to mention the protective coating keeps the lines looking clean!



  • OEM fit - track ready performance
  • Stainless wrapped teflon lines
  • DOT approved and pressure tested!
  • Protective outer PVC coating
  • Highest quality fittings and lines
  • Includes new banjo bolts and crush washers

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


What's News


Copyright 2019 SakeBomb Garage LLC. All Rights Reserved.