IGN-1A Smart Coil Plug & Play Mil-Spec Harness Adapter (FD3S RX-7)

 

When upgrading to the SBG IGN-1A (AEM/Mercury Marine) smart coils there are two options. You can build an adapter harness or buy a pre-made plug and play harness. Building your own harness requires expensive specialty tools and a large amount of labor. We created our harness to be easily adaptable, pre-wired for OEM configuration. You might be able to find a harness cheaper than ours, but you won't find a better one. We believe in parts that work as if they were OEM, but will last the life of your car.  Our harness is built to last and seamlessly integrate into your engine bay without permanent modifications.  Should you ever choose to return to stock, it can be done in a matter of minutes. 

 

Installing our harness is as simple as re-pinning the factory igniter connecter and following our detailed instruction guide included with the harness. Since our connectors are compatable with the factory wiring there is no cutting or splicing required! Compatible with stock ECU, Power FC and most FD compliant aftermarket ECU units.

 

• Silicone-coated fiberglass covering will withstand even the most extreme temperatures and abrasion
• 40 amp sealed relay
• Isolated engine and battery grounds
• Isolated optional sensor ground
• Weather sealed fuse holder
• Coil and connector labels included
• Easy install (no cutting or splicing required)
• Detailed instructions included