Sakebomb Garage Competition Rear Brake System (FD3S RX-7)

Our goal for this rear braking system was to provide a high-torque rear brake solution for the FD RX-7 which retains the stock e-brake.  This rear brake system was developed to be used in conjunction with our AP Competition Front Brake Kit for the RX-7.  While our Competition Front Brake Kit performs exceptionally well, the stock rears (or '99 spec for that matter) left some additional braking potential on the table.  Our rear brake kit utilizes the stock caliper with a billet 6061 aluminum relocation bracket to increase and optomize rear brake torque by allowing the use of our custom 330mm two piece rotor (vs 294mm stock rotor).  Our rotor is designed with a hard anodized aircraft-grade billet 2024 aluminum hat to withstand extreme temperatures, and is mated to our 330mm directional curved vane discs with aero-space hardware.  

This rear brake kit combined with our AP Competition Front Brake Kit for the FD3S RX-7, represents the pinacle of competion braking packages for the FD, while retaining the streetability required to drive to the track and back.


Our Brake Package Includes:

• Custom SBG Two-piece Brake Rotors (330x20mm) with Aluminum 2024 Hard Anodized Hats 
• 6061-T6 Caliper Relocation Brackets
• Hardware
• Installation Instructions
• Brake pads and lines are not included but optional*

SBG Rear Brake Kit Specs & Benefits:

• Increased disc diameter to 330x20mm (from 294mm stock)
• Lightweight two-piece rotors
• Directional curved vanes rings for increased cooling efficiency (compared to stock and '99 spec straight vane rotors)
• Retains e-brake, stock lines, stock pads 

NOTE: 17" rims or larger are required. This brake kit WILL NOT WORK the the stock 16" rims.  

NOTE: This rear brake kit has been designed to be used with our FD3S AP Competition Front Brake Kit. Installation of this rear kit with stock front brakes or other aftermarket front brakes is done at your own risk.  We recommend installing a proportioning valve with setups other than the SBG Front Competiton or Street Brake kits so that you may safely correctly adjust the rear brake bias . Installing this rear brake kit with any front braking system other than our FD3S AP Competition Front Brake Kit or Street Brake Kit may create an unsafe condition and is not recommended. Install at your own risk.