SBG Competition Dual Oil Cooler System (FD3S RX-7)

All of our kits include:

• High Performance 19 or 25 row cooler cores 
• Mocal 180 degrees oil thermostat
• Stainless steel and Aluminum mounting brackets for oil coolers and thermostat
• Stainless steel mounting hardware
• All lines (rubber/stainless/nylon racing) come pre-assembled and pressure tested with subtle black and silver Mocal fittings.

Options include:

• 25 Row Upgrade: Upgrade to 25-row Setrab cores. Even higher cooling capacity then our twin 19 row kit. We have reports of customers staying out ALL DAY at the track without any sign of rising temps! Don’t cut your track day short. Also 20b and high-HP 13b cars should consider this setup.
• '99 Spec / Aftermarket Bumper Hardware: Those of you running a '99 spec or aftermarket bumper will need to upgrade to this redesigned kit so that the coolers clear the bumper and can make better use of the larger inlets. (Please see the *note below)
• Nylon Braided Racing Lines: Black Nylon reinforced lines, ultra lightweight, high pressure and temp rating (and they look great!). These nylon lines have the benefits of braided reinforcement (like SS lines) but without the abrasion problems and lack of flexibility associated with SS lines.

A note about the '99 Spec / Aftermarket Bumper Hardware:

• When running the ‘99 Spec front bumper the coolers needed to be repositioned to utilize the larger bumper inlets and clear the rebar and '99 fog lights. Special fittings are required to then clear the headlights, in addition there is a more complex bracket setup required to relocate it to the proper position.
• Aftermarket bumpers: We engineered a small amount of adjustability into the '99 Spec brackets in hopes that people with aftermarket bumpers could adjust the position of the oil coolers to work with their bumper. We could not test the coolers with every aftermarket bumper out there (so we can't guarantee 100% that the brackets will fit without modification) but more than likely there is enough adjustability to fit the majority of aftermarket bumpers out there. You have an even better chance if your bumper uses the 99 lights or similar, as those bumpers were typically designed to work with the stock '99 oil cooler setup (which is basically how ours fits).

Hide the details.