Currency Displayed in
SakeBomb Garage is proud to release our NEW 4 pot REAR AP Racing brake kit for the FD3S RX7. Featuring the AP Racing CP8240 four piston caliper, paired with a floating AP Racing 340x28mm rotor, we've been calling it the "SBG Monster AP Rear Kit". **This kit is not compatible with a rear e-brake, and is a considered competition use only.** (If you are looking for a rear brake setup that retains the stock e-brake, please check out our SBG Rear Competition brake kit). This brake kit is designed to work with our SBG "Monster" 355x32 AP Racing Radi-Cal Brake Kit. We are very confident that this is the single highest performance rear brake system available for the FD3S RX7. You'll have to ditch your e-brake for this racing caliper set, so only competition level high horsepower FD's need apply!
Exclusive AP Racing J-Hook Slot Pattern - During exhaustive R&D testing, AP's J Hook design was found to create a constant pathway of evenly distorted material on the face of the disc. The hooks overlap radially to promote even heat distribution/distortion. In addition to reducing cracking, the even heating of the disc also helps provide an even transfer layer of pad material on the disc when you bed them in. Additionally, the J Hook slot pattern produces a greater number of leading edges for the pads to bite into for more even heat distribution, less propensity to crack, and cleaner pad material transfer during bed-in.
*Minor shaving of the top edge of the pad will be required.