SBG FPSpec "Smart Cooler" Dual Oil Cooler System (FD3S RX-7)

FD3S RX-7 DUAL "Smart Cooler" Oil Cooling Upgrade Kit

PLEASE NOTE: This is the product page for the DUAL Core kit for the FD3S.
If you'd like a "Smart Cooler" kit with a SINGLE Core only, please click here to view that product page.

Due to the high demand, all smart cooler kits carry a 3 week leadtime. Please be aware and plan your time for install accordingly!

Introducing the long-awaited SakeBomb Garage "Smart Cooler" cooling systems for the FD RX7!  Utilizing our patent-pending 'Smart Cooler' on-board thermostat, allows seamless integration with factory hard lines, makes for an OEM+ installation and much less hassle than our original 'Race' Oil Cooler Kits with a single H pattern thermostat that required running all new soft lines.  The SBG 'Smart Cooler' systems are expandable to dual core setups, and in this configuration (with two independent thermostats) reduces temperature fluctuation seen in a large single thermostat system, as oil can be bypassed back to the motor if the first oil cooler was able to cool sufficiently, or open to pass oil through the second cooler under high load situations!  

• Available Oil Cooler Cores
• Setrab Cores (19 or 25 row)
• Kraken Performance Cores (19 or 25 row)

Product Highlights for the 'Smart Cooler' system:

• Single and Dual Cooler Versions Available - Expandable Later if Needed
• Nylon Lines included for All Versions
• Patent Pending Billet Machined 6061 Smart Cooler Assemblies with Viton O-Ring Seals (will fit many aftermarket coolers)
• 200* Integrated Thermostat - Great for Track or Street Use Cases
• Smart Coolers Allow for Lower Total Oil Temperature Fluctuation, and Easy Integration  
• Smart Coolers Can be Set Up in Left and Right Configurations 
• High Quality -10AN Fittings Used Throughout
• Custom Made Billet 6061 Male and Female AN Adapter Fittings Integrate with Factory Lines and Fittings
• Aluminum Direct-Fit Mounting Brackets
• Pictorial Instruction Guide for Easy Install 

Available Configurations:

• Single Core 'Smart Cooler' Kit (19 or 25 Row)
• Dual Core Retrofit 'Smart Cooler' Kit (19 or 25 Row) - for cars that came with a SINGLE factory cooler, wanting to add a second cooler - extended soft lines and adapter fittings included for second cooler)
• Dual Core 'Smart Cooler' Kit (19 or 25 Row) - For R1/R2 cars that came with DUAL oil coolers from the factory
• SBG Race -> 'Smart Cooler' Kit - Upgrade kit to convert a previous SBG Oil Cooler Kit to 'Smart Cooler' setup (eliminating existing H-pattern thermostat) 
• Universal Versions of the 'Smart Cooler' Assemblies Available Separately - kits for other platforms, universal 'Smart Cooler' Parts, and FD RX7 adapter fittings available separately as well.

*For high performance rotary applications seeing higher than 100PSI, such as running 20w50 we recommend upgrading to the Setrab core version, as opposed to the Kraken cores, as they can take much higher sustained pressures. Sustained high pressure 100-130+ PSI is seen on OEM oiling systems when running high performance gear oil such as 20w30 during startup and cold conditions.