SBG Premium Spark Plug Wires (NA & NB Miata, OEM)

Whether your car is stock or a 500HP monster these wires will suit your needs for plug wires, and meet or exceed your expectations. We have created OEM replacement spark plug wires utilizing MSD 8.5mm super conductor wires and high quality connectors and boots. MSD's 8.5mm Super Conductor wire sets have a special helically wound core that has just 40-50 ohms of resistance per foot--but with an EMI/RFI suppression equal to a 1,500 ohm wire!  What's that mean?  More energy from your coils make it to your spark plug wires which would otherwise be converted to heat in a standard wire.  This heat not only robs your motor of a more intense spark but also degrades the wires themselves, reducing their life.  Each plug wire is also labeled with its cylinder number for ease of installation.

*Custom length wires available

Highlights:

• Lowest Ω (resistance) - means more spark energy transferred from your coils to your spark plugs. Less than 50 ohms per foot.  These blow everything, including the Magnacore wires, completely out of the water performance-wise.  The higher the resistance, the more heat is generated within the wire, contributing to quicker degradation of the wire and insulator.  We've come back to the same set of spark plug wires five years later and only read a marginal increase in resistance, still well below the measured resistances of new competitor wires.  If you care for these plug wires properly, they may be the last set you'll ever need to buy.

• Excellent EMF suppression - EMF (electromagnetic field) is created when passing large amounts of energy through a wire. We won't bother taking you back to physics class, but the helically wound wire found in the MSD Superconductor wire is excellent at suppressing the EMF radiation associated with passing high amounts of current, which would otherwise be injected into nearby wires. Forty feet of conductor is wound into a single foot of wire to supresses EMI, along with a ferro-magnetic impregnated core combine to create a highly effective EMI choke.

• Outstanding Silicone Insulator - Double walled silicone insulation creates an oil, abrasion, and electrical barrier second to none. MSD developed a proprietary silicone compound for the outer sleeve which protects the wire from high heat and abrasion, while the more ductile inner sleeve protects the conductor wire. The conductor core also features a DuPont Kevlar material for increased tensile strength.  The thick double walled insulator ensures the protection/longevity of these competition grade wires, allowing them to withstand the extreme environments found in the engine bays of competition race cars.  

• Spec Sheet Provided - Each wire is individually tested to ensure it meets our strict quality standards to provide you with wires of the lowest possible resistance (highest performance). We provide you with this information along with your wire set. Any wires not meeting our stringent specifications are discarded. We firmly stand behind the quality and performance numbers of our wires... if you can find a better wire, buy it. Use our performance numbers to compare Ω (resistance) ratings to the competition, your current wires, or track the status of your wire set over time.

• Designed for durability - Each wire has a strain relief at the top of the spark plug boot; this makes sure that the wire doesn't get damaged each time you pull it out to check or replace your spark plugs.  The spark plug wires also use high-quality boots and connectors, meaning that every component is designed and selected for maximum lifespan.  (We recommend pulling plug wires out by grabbing the top of the rubber spark plug boot, not directly from the wire itself.  Dielectric grease will also help the boots release easier and provide a better electrical connection between coil and plug.)

 *If you require custom wire lengths for relocated coils please contact us via info@sakebombgarage.com for a price quote.